MENU

Email us for a quote

Call to discuss your
project now on:

800 580 3984

noise and vibration

noise and vibration

Clamp Blocks

S/CB Clamp Blocks are manufactured from a block of TICO S material which is cut with a hole to match the diameter of the supporting pipe, and then split to facilitate easy installations.

Key Features

  • Anchor pipes firmly whilst allowing expansion and contraction
  • Provide protection and uniform spacing of pipelines
  • Absorb shock and vibration caused by fluid velocity and turbulence
  • Highly customisable
  • Maximum operating temperature 100˚C (212˚F), can be extended by using alternative TICO grades

Clamp Block Types

Single Bore

  • Designed for use with a U-Bolt
  • Standard dimensions available (see size guide) but can be custom sized for specific applications
  • Can be supplied with a low friction bore (TICO S/NG/CB Clamp Block)
  • Not held in stock but manufactured to order

 

JW Part No.GABCDepthEHY'U' Bolt 0 F
M 92-16 16 33 21 42 25 3 25 52 10
M 92-25 25 38 30 60 25 3 25 70 10
M 92-30 30 40 30 60 25 6 25 70 10
M 92-38 38 44 38 76 25 6 25 86 10
M 92-45 45 61 38 76 50 6 38 86 10
M 92-57 57 67 45 90 50 9.5 38 102 12
M 92-76 76 76 57 114 50 9.5 38 126 12
M 92-89 89 83 70 140 50 9.5 38 152 12
M 92-108 108 104 85 170 75 9.5 50 182 12
M 92-159 159 130 110 220 75 12.5 50 236 16
M 92-219 219 160 162 324 75 12.5 50 344 20

Multiple Pipe

  • Ideally suited for maintaining a regular spacing of pipes with the additional benefits of vibration attenuation.
  • No standard types, always custom designed and manufactured to order.
  • Please contact Tiflex Technical Team with project requirements.

Multiple Low Friction Bore

  • S/NG/CB clamp blocks are identical to S/CB clamp blocks but with the added benefit of a molybdenum disulphide impregnated nylon bush to provide a low friction bore for the accommodation of additional longitudinal movement.
  • Please contact Tiflex Technical Team if a size not specified in the standard range is required. We can manufacture bespoke clamps to suit specific applications.

Details

S/CB Clamp Blocks are manufactured from a block of TICO S material which is cut with a hole to match the diameter of the supporting pipe, and then split to facilitate easy installations. There are numerous configurations of Clamp Block to suit different pipe configurations and types of support – including multiple bore blocks to support more than one pipe at the same time, and single bore blocks profiled to allow fixing with traditional U-Bolts.

Where the pipe is subjected to longitudinal movement, the bore of the clamp block can be lined with a special split sleeve of molybdenum disulphide loaded nylon – this type of unit is an S/NG/CB Clamp Block

Contact Us

For assistance with your structural design or thermal calculations.

Ask Armadillo

Main Menu